Skip to content
Talk to us

Electronics

Electronics manufacturers that build touchscreen and human-machine interface devices. They need a stable embedded Linux platform, with driver support they can rely on.

Hardware
Boundary Devices Nitrogen i.MX6 · Raspberry Pi CM4
The work
A stable desktop, and wider driver support
A panel computer with a dark screen on a workshop bench, with a carrier board and a compute module.

The work

Touchscreen HMI platform

A reboot-time crash fixed, and the hardware support extended

Case data

Industry
Electronics, human-machine interface hardware
Product line
Touchscreen embedded Linux platform
Boards
Boundary Devices Nitrogen i.MX6, and Raspberry Pi CM4
Scope
X11 desktop stability, real-time clock I2C driver, GPIO port expander driver
  • Startup crash

    We found and fixed a desktop crash that happened after a reboot. The touchscreen interface starts reliably again.

  • Real-time clock

    We added the RTC I2C driver. The platform keeps accurate time with no network.

  • GPIO expander

    We added port expander support, so the platform controls more I/O lines for the hardware that comes next.

Send us a message about your product

A few lines are enough: what the device does, which processor it uses and when it must ship.

For example

We make a gateway on an NXP i.MX 8M Plus. We need a Yocto BSP and secure updates in 3 months.

An engineer who does this work reads your message and answers you.