Skip to content
Talk to us

Security

Makers of access control and physical security hardware. They build IP-connected panels and expansion boards, and each one needs a dependable embedded Linux base.

Hardware
NXP i.MX6
The work
Board bring-up through to production
A door terminal with a keypad and a card reader on a concrete wall, beside a steel door.

The work

IP access control panel platform

From board bring-up to a production installer

Case data

Industry
Security, access control
Product line
IP door access control panel and expansion board
Silicon
NXP i.MX6
Scope
Hardware bring-up, hardware description, debugging, kernel upgrade, platform development, production installer, boot variables
  • Board bring-up

    We brought up a new IP door access expansion board and validated it. The platform runs on the new hardware.

  • Hardware fault

    We reproduced and diagnosed a fault on the panel, and we documented the path to a fix.

  • Hardware description

    We wrote the board's description. All later kernel and driver work depends on it.

  • Kernel

    We added support for a newer release, so the platform sits on a current Linux baseline.

  • The platform

    We built out the embedded Linux the panel runs on.

  • Production installer

    We built a production image installer. Manufacturing flashes and deploys a new unit with it.

  • Boot variables

    We implemented U-Boot fw_env support. The software reads and writes the persistent variables that track update state and boot counts.

Send us a message about your product

A few lines are enough: what the device does, which processor it uses and when it must ship.

For example

We make a gateway on an NXP i.MX 8M Plus. We need a Yocto BSP and secure updates in 3 months.

An engineer who does this work reads your message and answers you.